CISCO CCNP SUPER COMBO:

ENCOR + ENARSI

STARTING From 11- MARCH-2023 | SAT and SUN | 8:00 PM IST 🇮🇳 | 8:30 AM CST 🇺🇸 | 12:30 AM AEST 🇦🇺 | 6:30 PM Dubai 🇦🇪 |  9:30 AM EST 🇬🇧

Trainer: Mr. RAHUL || (RS,SP,DC)

Two Demo Class Starting In …….

Days
Hours
Minutes
Seconds
COURSE NAMEDATESCHEDULETIMINGSSESSION DURATIONENROLL NOW
CISCO CCNP (ENCOR+ENARSI)11-MARCH-2023SAT and SUN8:00 PM IST2 HoursPAY NOW (ENCOR+ENARSI only)
SDWAN [300-415] ENSWIonce above course is doneonce above course is doneonce above course is doneonce above course is donePAY NOW (SDWAN only)
CCNP BUNDLE COMBO)
(CCNP ENCOR+SDWAN)PAY NOW (combo: ENCOR+ENARSI+SDWAN)

Our Lab Topology

ccnp v2.0 - www.networkjourney.com
CCNP MASSIVE TOPOLOGY (BOTH ENCOR + ENARSI) COVERED
SDWAN PRACTICE TOPOLOGY

Benefits of Cisco CCNP ?

Benefits Joining Our Batch ?

✅ 3-Months of Course, Every Sat & Sun @ 9:00 AM IST (Weekends)

✅ The detailed Online Live Classes will last 2 Hrs each

✅ The Course includes 100 Lab Workbook covering all Enterprise day-today used Scenarios

✅ CCNP: 540 Months Lab Access \ Home Lab Setup
✅ SDWAN: 300 Hrs Lab Access

✅ Each Class is focused on teaching Realtime aspects with  Lab Practical Demonstration

✅ 24×7 After Class Lab Support Available

✅ Multiple Free Re-takes Available of the Same Enrolled Course

✅ Lifetime Access to Webportal containing Recording Videos, Google drive link to Automation Tools and Software’s

and more ...
0

Labs for the Cisco CCNP & SDWAN Exam…

and more ...
0

Hours Of Lab Access Provided…

Course Content Overview

Cisco SDWAN 300-415 ENSDWI

20% 1.0 Architecture
  • [THEORY] 1.1 Describe Cisco SD-WAN architecture and components
  • [THEORY] 1.1.a Orchestration plane (vBond, NAT)
  • [THEORY] 1.1.b Management plane (vManage)
  • [THEORY] 1.1.c Control plane (vSmart, OMP)
  • [THEORY] 1.1.d Data plane (WAN Edge)
  • [THEORY] 1.1.d (i) TLOC
  • [THEORY] 1.1.d (ii) IPsec and GRE
  • [THEORY] 1.1.d (iii) vRoute
  • [THEORY] 1.1.d (iv) BFD
  • [THEORY] 1.2 Describe Cisco SD-WAN Edge platforms and capabilities
  • [THEORY] 1.3 Describe Cisco SD-WAN Cloud OnRamp
  • [THEORY] 1.3.a SaaS
  • [THEORY] 1.3.b IaaS
  • [THEORY] 1.3.c Colocation
15% 2.0 Controller Deployment
  • [THEORY] 2.1 Describe controller cloud deployment
  • [THEORY] 2.2 Describe controller on-premises deployment
  • [THEORY] 2.2.a Hosting platform (KVM and Hypervisor)
  • [THEORY] 2.2.b Installing controllers
  • [THEORY] 2.2.c Scalability and redundancy
  • [THEORY] 2.3 Configure certificates and device lists
  • [THEORY] 2.4 Troubleshoot control plane connectivity between controllers
Router Deployment
  • [THEORY] 3.5 Configure CLI and vManage feature configuration templates
  • [THEORY] 3.5.a VRRP
  • [THEORY] 3.5.b OSPF
20% 3.0 Router Deployment
  • [THEORY] 3.5.c BGP
  • [THEORY] 3.5.d EIGRP
  • [THEORY] 3.6 Describe multicast support in Cisco SD-WAN
  • [THEORY] 3.1 Describe WAN Edge deployment
  • [THEORY] 3.1.a On-boarding
  • [THEORY] 3.1.b Orchestration with zero-touch provisioning and plug-and-play
  • [THEORY] 3.1.c Data center and regional hub deployments
  • [THEORY] 3.2 Configure Cisco SD-WAN data plane
  • [THEORY] 3.2.a Circuit termination and TLOC-extension
  • [THEORY] 3.2.b Dynamic tunnels
  • [THEORY] 3.2.c Underlay-overlay connectivity
  • [THEORY] 3.3 Configure OMP
  • [THEORY] 3.4 Configure TLOCs
20% 4.0 Policies
  • [THEORY] 4.1 Configure control policies
  • [THEORY] 4.2 Configure data policies
  • [THEORY] 4.3 Configure end-to-end segmentation
  • [THEORY] 4.3.a VPN segmentation
  • [THEORY] 4.3.b Topologies
  • [THEORY] 4.4 Configure Cisco SD-WAN application-aware routing
  • [THEORY] 4.5 Configure direct Internet access
Security and Quality of Service
  • [THEORY] 5.3.a. DNS security
  • [THEORY] 5.3.b. Secure Internet Gateway (SIG)
  • [THEORY] 5.4 Configure QoS treatment on WAN Edge routers
15% 5.0 Security and Quality of Service
  • [THEORY] 5.1 Configure service insertion
  • [THEORY] 5.2 Describe Cisco SD-WAN security features
  • [THEORY] 5.2.a. Application-aware enterprise firewall
  • [THEORY] 5.2.b IPS
  • [THEORY] 5.2.c URL filtering
  • [THEORY] 5.2.d AMP
  • [THEORY] 5.2.e SSL and TLS proxy
  • [THEORY] 5.3 Describe Cloud security integration
  • [THEORY] 5.4.a Scheduling
  • [THEORY] 5.4.b Queuing
10% 6.0 Management and Operations
  • [THEORY] 6.1 Describe authentication, monitoring, and reporting from vManage
  • [THEORY] 6.2 Configure authentication, monitoring, and reporting
  • [THEORY] 6.3 Describe REST API monitoring
  • [THEORY] 6.4 Describe software image management from vManage
Security and Quality of Service
  • [THEORY] 5.4.c Shaping
  • [THEORY] 5.4.d Policing
  • [THEORY] 5.4.e Marking
  • [THEORY] 5.4.f Per-tunnel and adaptive QoS
Module 7: Lab Workbook
  • [LAB] Lab#1: Configuration of Provider Network
  • [LAB] Task1.1: Configure MPLS Router
  • [LAB] Task1.2: Configure Internet
  • [LAB] Task1.3: Configure 4G LTE
  • [LAB] Task1.4: Configure ALPHA-HQ LTE
  • [LAB] Lab#2: Initialization of vManage via CLI
  • [LAB] Task2.1: Configure vManage System Parameters
  • [LAB] Task2.2: Configure vManage VPN 0 Configuration
  • [LAB] Task2.3: Configure vManage VPN 512 Configuration
  • [LAB] Lab#3: Initialization of vBond via CLI
  • [LAB] Task3.1: Configure vBond System Parameters
  • [LAB] Task3.2: Configure vBond VPN 0 Configuration
  • [LAB] Task3.3: Configure vBond VPN 512 Configuration
  • [LAB] Lab#4: Initialization of vSmart via CLI
  • [LAB] Task4.1: Configure vSmart System Parameters
  • [LAB] Task4.2: Configure vSmart VPN 0 Configuration
  • [LAB] Task4.3: Configure vSmart VPN 512 Configuration
  • [LAB] Lab#5: Initialization of ETA Site vEdges via CLI
  • [LAB] Task5.1: Configure vEdge1-ETA System Parameters
  • [LAB] Task5.2: Configure vEdge1-ETA VPN 0 Configuration
  • [LAB] Task5.3: Configure vEdge2-ETA System Parameters
  • [LAB] Task5.4: Configure vEdge2-ETA VPN 0 Configuration
  • [LAB] Lab#6: Initialization of GAMMA Site vEdges via CLI
  • [LAB] Task6.1: Configure vEdge1-GAMMA System Parameters
  • [LAB] Task6.2: Configure vEdge1-GAMMA VPN 0 Configuration
  • [LAB] Task6.3: Configure vEdge2-GAMMA System Parameters
  • [LAB] Task6.4: Configure vEdge2-GAMMA VPN 0 Configuration
  • [LAB] Lab#7: Initialization of ZETA Site vEdge via CLI
  • [LAB] Task7.1: Configure vEdge1-ZETA System Parameters
  • [LAB] Task7.2: Configure vEdge1-ZETA VPN 0 Configuration
  • [LAB] Lab#8: Initialization of DELTA Site vEdge via CLI
  • [LAB] Task8.1: Configure vEdge1-DELTA System Parameters
  • [LAB] Task8.2: Configure vEdge1-DELTA VPN 0 Configuration
  • Lab#9: Configure Windows Server as CA Server
Module 8: Lab Workbook (contd)
  • [LAB] Task9.1: Configure Windows Server Network Adapter
  • [LAB] Task9.2: Add CA Server role in Windows Server
  • [LAB] Lab#10: Generate Root Certificate from CA Server
  • [LAB] Task10.1: Complete basic initial configuration of vManage via GUI
  • [LAB] Task10.2: Generate root certificate from CA server and Install it to vManage
  • [LAB] Task10.3: Generate CSR from vManage
  • [LAB] Task10.4: Issue Identity Certificate from CA Server
  • [LAB] Task10.5: Install Identity Certificate to vManage
  • [LAB] Lab#11: Add vBond to vManage and Generate Identity Certificate for vBond
  • [LAB] Task11.1: Add vBond to vManage
  • [LAB] Task11.2: Generate CSR from vBond
  • [LAB] Task11.3: Issue Identity Certificate from CA Server
  • [LAB] Task11.4: Install Identity Certificate to vBond
  • [LAB] Lab#12: Add vSmart to vManage and Generate Identity Certificate for vSmart
  • [LAB] Task12.1: Add vSmart to vManage
  • [LAB] Task12.2: Generate CSR from vSmart
  • [LAB] Task12.3: Issue Identity Certificate from CA Server
  • [LAB] Task12.4: Install Identity Certificate to vSmart
  • [LAB] Lab#13: Initialization of BETA Site cEdge via CLI
  • [LAB] Task13.1: Configure cEdge1-BETA System Parameters
  • [LAB] Task13.2: Configure cEdge1-BETA interface
  • [LAB] Lab#14: Enable Tunnel Interface on VPN0 Interfaces
  • [LAB] Task14.1: Enable Tunnel interface inside VPN0 on vManage, vBond, vSmart, vEdges /cEdges & allow service all, sshd and netconf
  • [LAB] Lab#15: Uploading viptela.serial file to vManage
  • [LAB] Task15.1: Upload viptela.serial file to vManage for registering vEdges and cEdges to vManage
  • [LAB] Lab#16: Register vEdge/cEdge to vManage
  • [LAB] Task16.1: Upload the Root certificate from vManage to vEdge/cEdge
  • [LAB] Task16.2: Install the Root certificate on vEdges/cEdge
  • [LAB] Task16.3: Activate vEdges/cEdge
  • [LAB] Task16.4: Once vEdge/cEdge are activated, check control connections from all vEdges/cEdges
  • [LAB] Lab#17: Configure Internal Routing on ETA|ZETA|DELTA|BETA Sites
  • [LAB] Task17.1: Configure basic ip addressing and Enable OSPF routing on SW1-ETA & SW2-ETA
  • [LAB] Task17.2: Configure Basic ip addressing and Enable BGP routing on SW1-DELTA & SW1-BETA
  • [LAB] Task17.3: Adding Configuration for extra MPLS link added on DELTA Site
Module 9: Lab Workbook (contd)
  • [LAB] Lab#18: Configure Feature Templates
  • [LAB] Task18.1: Configure Feature System template to be used by vEdges
  • [LAB] Task18.2: Configure Feature VPN0 template to be used by vEdges
  • [LAB] Task18.3: Configure Feature VPN0 Interface template (MPLS) to be used by vEdges
  • [LAB] Task18.4: Configure Feature VPN0 Interface template (INT) to be used by vEdges
  • [LAB] Task18.5: Configure Feature VPN0 Interface template (LTE) to be used by vEdges
  • [LAB] Task18.6: Configure Feature VPN512 template to be used by vEdges
  • [LAB] Task18.7: Configure Feature VPN512 Interface template to be used by vEdges
  • [LAB] Task18.8: Configure Feature VPN100 template to be used by vEdges
  • [LAB] Task18.9: Configure Feature VPN100 Interface template (SERVICE) to be used by vEdges
  • [LAB] Task18.10: Configure Feature VPN100 OSPF template to be used by vEdges
  • [LAB] Task18.11: Configure Feature VPN100 BGP template to be used by vEdges
  • [LAB] Task18.12: Configure Feature OMP template to be used by vEdges
  • [LAB] Lab#19: Configure Device Templates
  • [LAB] Task19.1: Configure Device Template used by vEdge ETA1 & vEdge ZETA1
  • [LAB] Task19.2: Attach Device Template to be used by vEdge ETA1 & vEdge ZETA1
  • [LAB] Task19.3: Configure Variables in Device Template to be used by vEdge ETA1 & vEdge ZETA1
  • [LAB] Task19.4: Apply Device Template to be used by vEdge ETA1 & vEdge ZETA1
  • [LAB] Task19.5: Configure Device Template used by vEdge1-DELTA
  • [LAB] Task19.6: Attach Device Template to be used by vEdge1-DELTA
  • [LAB] Task19.7: Configure Variables in Device Template to be used by vEdge1-DELTA
  • [LAB] Task19.8: Apply Device Template to be used by vEdge1-DELTA
  • [LAB] Lab#20: Verification on vEdge ETA | ZETA | DELTA Site
  • [LAB] Task20.1: Simulate traffic flow from vEdge1-ETA to vEdge1-ZETA
  • [LAB] Task20.2: Simulate traffic flow from vEdge1-DETA to vEdge1-ZETA
  • [LAB] Task20.3: Routing Table for VPN 100 shows all prefixes from all sites via OMP on vEdge1-ETA,vEdge1-ZETA, vEdge1-DELTA
  • [LAB] Task20.4: Ping & Traceroute from DELTA Switch to ETA | ZETA LAN Segment
Module 10: Lab Workbook (contd)
  • [LAB] Lab21: Configure CLI Template
  • [LAB] Task21.1: Configure vEdge ETA2 using CLI template
  • [LAB] Task21.2: Attach Device Template to be used by vEdge ETA2
  • [LAB] Task21.3: Configure Variables in Device Template to be used by vEdge ETA2
  • [LAB] Task21.4: Apply Device Template to be used by vEdge ETA2
  • [LAB] Lab22: Verification on vEdge-ETA2
  • [LAB] Task22.1: Simulate traffic flow from vEdge2-ETA to vEdge1-ZETA
  • [LAB] Task22.2: Routing Table for VPN 100 shows all prefixes from all sites via OMP on vEdge2-ETA
  • [LAB] Task22.3: Ping & Traceroute from ETA2 Switch to ZETA LAN Segment
  • [LAB] Lab23: Configure Feature Templates for CSR device
  • [LAB] Task23.1: Configure Feature System template to be used by cEdge
  • [LAB] Task23.2: Configure Feature VPN0 template to be used by CSR
  • [LAB] Task23.3: Configure Feature VPN0 Interface template (MPLS) to be used by cEdge
  • [LAB] Task23.4: Configure Feature VPN0 Interface template (INT) to be used by cEdge
  • [LAB] Task23.5: Configure Feature VPN512 template to be used by CSR
  • [LAB] Task23.6: Configure Feature VPN512 Interface template to be used by cEdges
  • [LAB] Task23.7: Configure Feature VPN100 template to be used by cEdges
  • [LAB] Task23.8: Configure Feature VPN100 Interface template (SERVICE) to be used by cEdges .
  • [LAB] Task23.9: Configure Feature VPN100 BGP template to be used by cEdges
  • [LAB] Task23.9: Configure Feature OMP template to be used by cEdges
  • [LAB] Lab24: Configure Device Template for cEdge
  • [LAB] Task24.1: Configure Device Template used by cEdge ETA2
  • [LAB] Task24.2: Attach Device Template to be used by cEdge BETA1
  • [LAB] Task24.3: Configure Variables in Device Template to be used by cEdge BETA
  • [LAB] Task24.4: Apply Device Template to be used by cEdge BETA1
  • [LAB] Lab25: Verification on cEDGE1-BETA
  • [LAB] Task25.1: Checking outbound-connections on cEDGE1-BETA and vEdge1-DELTA
  • [LAB] Task25.2: Verifying routes on SW1-BETA from other sites LAN Segment
  • [LAB] Task25.3: Ping & Traceroute from SW1-BETA to ZETA|ETA LAN Segments
  • [LAB] Lab26: Advertising TLOC EXT subnets in service provider networks
Module 11: Lab Workbook (contd)
  • [LAB] Task26.1: Advertised TLOC EXT Subnets on HQ1-ALPHA, MPLS and INTERNET
  • [LAB] Task26.2: Update Lab Diagram on GAMMA Site as per below Diagram
  • [LAB] Task26.3: Configure basic ip addressing and Enable OSPF routing on SW1-GAMMA
  • [LAB] Lab27: TLOC Extension Lab on GAMMA SITE
  • [LAB] Task27.1: Configure Feature VPN0 template to be used by vEdge1-GAMMA & vEdge2-GAMMA
  • [LAB] Task27.2: Configure Feature VPN0 Interface template (Extension-Interface) to be used by vEdges GAMMA1 & GAMMA2
  • [LAB] Task27.3: Configure Feature VPN0 Interface template (Tunnel-Interface) to be used by v Edges GAMMA1 & GAMMA2
  • [LAB] Lab28: Configure Device Templates for GAMMA1 and GAMMA2
  • [LAB] Task28.1: Configure Device Template used by vEdge1-GAMMA
  • [LAB] Task28.2: Attach Device Template to be used by vEdge1-GAMMA
  • [LAB] Task28.3: Configure Device Template used by vEdge2-GAMMA
  • [LAB] Task28.4: Attach Device Template to be used by vEdge2-GAMMA
  • [LAB] Lab29: Verification on vEdge1-GAMMA & vEdge2-GAMMA
  • [LAB] Task29.1: Checking omp tloc-advertised on vEdge1-GAMMA & vEdge2-GAMMA
  • [LAB] Task29.2: Checking omp tloc-paths on vSmart
  • [LAB] Lab30: VRRP Lab on GAMMA SITE
  • [LAB] Task30.1: Configure Feature vEdge-VPN100-SERVICE G0/3 template for VRRP to be used by vEdge1-GAMMA & vEdge2-GAMMA
  • [LAB] Task30.2: Configure Device Template and replace existing vEdge-VPN100-SERVICE-G0/3 by newly created VRRP Template (vEdge-VPN100-VRRP-SERVICE-G0/3) used by vEdge1-GAMMA
  • [LAB] Task30.4: Configure Device Template and replace existing vEdge-VPN100-SERVICE-G0/3 by newly created VRRP Template (vEdge-VPN100-VRRP-SERVICE-G0/3) used by vEdge2-GAMMA
  • [LAB] Task30.5: Verification of VRRP on vEdge1-GAMMA & vEdge2-GAMMA
  • [LAB] Lab31: Verify current Mode on vSmart (CLI / vManage) and apply a template if required
  • [LAB] Task31.1: Verify current mode on vSmart (CLI / vManage)
  • [LAB] Task31.2: Configure System Feature Template for vSmart
  • [LAB] Task31.3: Configure VPN0 Feature Template for vSmart
  • [LAB] Task31.4: Configure VPN0 Interface Feature Template for vSmart
  • [LAB] Task31.5: Configure VPN512 Feature Template for vSmart
  • [LAB] Task31.5: Configure VPN512 Interface Feature Template for vSmart
Module 12: Lab Workbook (contd)
  • [LAB] Task31.6: Configure Device Template for vSmart
  • [LAB] Task31.7: Attach Device Template to be used by vSmart
  • [LAB] Task31.8: Configure Variables in Device Template to be used by vSmart
  • [LAB] Task31.9: Apply Device Template to be used by vSmart
  • [LAB] Task31.10: Verify new mode on vSmart (CLI / vManage)
  • [LAB] Lab32: Control Plane Policy – Blocking Subnets
  • [LAB] Task32.1: Create Lists
  • [LAB] Task32.2: Create Topology (Control Policies)
  • [LAB] Task32.3: Add Policy
  • [LAB] Task32.4: Pre-Verification // Verify routes from Delta LAN Segment to SW2-ETA
  • [LAB] Task32.5: Activate the policy
  • [LAB] Task32.6: Post-Verification || Verify routes from Delta LAN Segment to SW2-ETA
  • [LAB] Lab33: Data Plane Policy – Blocking Telnet Access
  • [LAB] Task33.1: Create Lists
  • [LAB] Task33.2: Create Traffic Rules (Data Policies)
  • [LAB] Task33.3: Pre-Verification // Verify telnet from Delta Site to Zeta Site
  • [LAB] Task33.4: Activate the policy .
  • [LAB] Task33.5: Post-Verification // Verify telnet from Delta Site to Zeta Site
  • [LAB] Lab34: Hub & Spoke Topology
  • [LAB] Task34.1: Create Lists .
  • [LAB] Task34.2: Create Topology (Hub & Spoke Policy)
  • [LAB] Task34.3: Add Policy
  • [LAB] Task34.4: Activate the policy
  • [LAB] Task34.5: Post-Verification || Verify Routes Again
  • [LAB] Task34.6: Copy & Configure Feature VPN100 template to be used by vEdge1-Delta
  • [LAB] Task34.7: Edit Device Template used by vEdge1-DELTA
  • [LAB] Lab35: Application Aware Routing
  • [LAB] Task35.1: Create Lists
  • [LAB] Task35.2: Create Traffic Rules (Data Policies)
  • [LAB] Task35.3: Add Policy
  • [LAB] Task35.4: Pre-Verification || Verify path from ZETA to DELTA Site
  • [LAB] Task35.5: Activate the policy
  • [LAB] Task35.6: Post-Verification || Verify path from ZETA to DELTA Site after Policy
  • [LAB] Task35.7: Post-Verification After SLA breached|| Verify path from ZETA to DELTA Site after Policy

PAYMENT LINK HERE

First 2 Class Free To Join:​

11 Mar

This is for Demo 1 Link

  • 20:00 pm
  • Online Zoom Meeting Invite

This is for FREE Demo 1 Link. Zoom meeting ID will be updated atleast 24Hrs prior to demo class

Testimonials

Sagar is a seasoned Cisco Technology Instructor with proven Industry experience. I have been privileged to attend his live training in CCNP Enterprise & Network Automation and the knowledge gained is invaluable. His style of teaching references real time examples and his ability to breakdown complex topics into easily understandable chunks is outstanding. He is without a doubt highly recommended.
John Doe
CISCO Certified | Network Engineering & Security Managemen
THIS COURSE IS AWARDED AS "MOST TRENDING COURSE" | RATINGS:
5/5

Frequently asked questions(FAQ)

 

FAQ

– Benefits of CCNP Routing and Switching Certification
A) CCNP Routing and Switching certification have a series of benefits that come with it. It retains a prominent and relevant position in the networking industry. Having CCNP certification indicates a good command over the Routing and Switching skills. Below are some of the benefits of CCNP Routing and Switching certification:

B) Skills and knowledge acquired during the learning of CCNP Routing and Switching certification exam provide a firm base that makes an individual competent of working in physical and virtualized networks of existing and future.

C) This certification helps the applicant to acquire great jobs in the networking field. The holder can be self-confident of receiving a higher salary since CCNP Routing and Switching certification is continually associated with high-qualified professionals.

D) Holding CCNP Routing and Switching certification reveals the holder to a diversity of improvements as they can work in various organizations. The paramount skills achieved are destined to a variety of promotions in organizations that utilize networking to accomplish their goals.

E) Once an applicant has earned CCNP Routing and Switching certification, they become “desired professionals” by organizations which demand the professionals with a piece of intense expertise in routing and switching. This is because CCNP Routing and Switching exams expect one to demonstrate his/her proficiency in every concept learned.

F) The benefits and respect a CCNP holder gains are very well-defined. This is as a result of a rigorous process one undergoes to earn the certification. A very few people possess this credential.

G) CCNP Routing and Switching certification do not require the candidate to do all the exams in a particular order to get certified. This is very beneficial to the applicant because one can concentrate and create a proper and practical study plan.

– Cisco CCNP Encor

– Cisco CCNP Enarsi

– Cisco Devnet 300-415

$300 USD

Student requested to book Official Exam directly on Cisco Pearson VUE account.

We only provide Necessary Training required to clear your Official exam at First attempt without wasting your hard-earned money.

Our Training will help you clear your exam at first attempt, prepare you well for Job Interview, New Job Hunt and make you better Engineer.

Multiple Free Re-takes of Live batch are available and also if incase you don’t want to go through entire batch you can sit only on missed classes.

Alternatively, we also provide Recordings of every class in our Webportal for lifetime access

  • NOC Engineers
  • L1, L2, L3, L4
  • Network Engineers
  • CCNA, CCNP, CCIE Certified Engineers
  • Network security administrators
  • Network administrators
  • Network analyst
  • Network engineers
  • Network analyst
  • Network consultants
  • Basic knowledge of networking
  • TCP/IP protocol knowledge
  • Basic knowledge on Windows server/Unix
  • Basic knowledge on “line vty”, “ssh”, “ospf”, “bgp”, “vlan”, “ip address”, “telnet”, “router”, “switch”, “firewall”, “junos”, “arista”, “linux”
  • This Course will help you certify Official Cisco Certification Courses:
  • CISCO DEVNET 200-301 (DEVASC)
  • Knowledge of Python is NOT required, we will start from scratch/beginner level.

Total 35-45 Hrs of Content

Student Enrolling to:

  1. Mon-Thursday Weekdays batch (Daily 1 Hour Session): will take upto 2.5 – 3 Months
  2. Sat & Sun Weekend batch (Daily 3 Hours Session): will take upto 1.5 – 2 Months
  3. Bootcamp (1to1 Training): 15 Days, however, price x4 of regular pricing

Paypal, India NEFT, BHIM/UPI, G Pay

Student opts either Online LIVE Instructor-Led or Self-paced Learning with Labs

Online LIVE Instructor-Led: $317USD, click here to book your slot 


Self-paced Learning: $200USD, click here to place order

Live Online Classes:
Live online classes are synchronous events organized in a live virtual meeting room where students and teachers meet together to communicate with voice, video, whiteboard.

Benefits of Live Online Classes:

  • Rapid acquisition of knowledge.
  • Immediate feedback.
  • Live online classes require students and instructors to be online at the same time.
  • Meetings and lectures occur at the same hour.
  • All attendees must be online and connected to the internet at that specific hour.
  • Ideal for content that changes regularly: If you have core content that needs to be updated regularly, then opting for live online learning may be the best choice.

Self-paced Learning:
Online courses are delivered asynchronously where students learn on their own schedule (self-paced learning) without any real time instructor. The course content – lessons, prerecorded video lectures and tutorials, tests and quizzes, homework and assignments can be access by the students enrolled in the course at any time, as long as the course is active and available.

Benefits of Self-paced Learning:

  • Learners are able to go at their own pace.
  • There is no scheduling involved.
  • No direct mentor or tutor to clarify or analyze mistakes, no solution checks.
  • Ideal for permanent content: If you happen to have content or information that isn’t going to change in the near future, such as company policies, that new employees must memorize, then self-paced learning is a great option.

Trainer Profile

unkown profile pic
Mr. Rahul

(RS,DC,SP)

7500+ HOURS OF TRAINING DELIVERED IN LAST 7 YEARS | Expert in SDWAN, ACI, SDACCESS, MPLS, BGP
COURSE SUMMARY
Course Name:CCNP SUPER COMBO
Timings:8PM to 10:00PM IST
Schedule: SAT and SUN (Weekend)
Mode Of Training:Both LIVE, Self-paced Available, refer FAQs​
Material: Classnotes, Workbook, PDF provided​
Lab Access:CCNP: 6 months Unlimited lab access || SDWAN: 300 hours Unlimited Lab Access without Day limits
Offline Lab:Downloadable Files provided, however, Student to Install themselves​
Emulators:GNS3, EVENG PRO, EVENG COMM, PNET all supported​
Recordings:Lifetime access to Recordings​
Free Classes:2 Free Demo, Register here
Course Level:Beginner, Intermediate​, Advance
How to Join Live Meeting:We provide Zoom Meeting Invite before the Class​
How to Watch Recordings:Access on Laptop, Mobile and TV​
Certificate of completion:Yes, provided after Course completion​
Add These New Skillsets To Your Resume:
CCNP, CISCO, ENCOR, ENARSI, SDWAN, CONTROLLERS, BGP, OSPF, MPLS, VPN
?>